Stratasys
h550 SAF Printer
The Stratasys H550 is an SAF powder bed fusion 3D printer for manufacturers and service bureaus that have outgrown their build size. It runs the same Selective Absorption Fusion process as the H350, with a 34.2-liter build volume that is about 80% larger. You can print bigger end-use parts and fit more of them in every build. Paired with the PowderEase T2 for automated powder handling, it is built to bring cost per part down as production grows.
Built for Larger Parts and Higher Volumes
Production teams tend to hit the same limits: parts that don’t fit the build, capacity that can’t keep up with demand, and cost per part that won’t come down. The H550’s 450 mm build height fits single-piece parts that used to be split or sent out. Service bureaus can run large parts and dense batches of small ones on one platform. Aerospace and defense teams can print UAV frames and components, including a 2-meter-wingspan VTOL airframe nested in a single build. Automotive teams can produce large manifolds, ducts, fixtures, and short-run parts. Industrial manufacturers can make end-of-arm tooling and other manufacturing aids. Orthotics and prosthetics labs can print tall ankle-foot orthoses as one piece.
More Parts per Build at a Lower Cost per Part
Due to innovative and uniform thermal control, SAF technology achieves builds with precise geometric accuracy and strong mechanical capabilities. Each production-grade part, ranging from bulky to complex, maintains repeatability and consistency. Additionally, High Yield PA11 polymer powder accomplishes parts that are impact resistant and durable.
H350 vs H550: Choosing the Right SAF Printer
| H350 | H550 | |
|---|---|---|
| Build volume | 315 x 208 x 293 mm (19.2 L) | 365 x 208 x 450 mm (34.2 L) |
| Part sizes | Small to mid-size | Small, mid-size, and large |
| Parts per build | Baseline | More than 2x |
| Throughput | Baseline | Up to 50% higher |
| Total cost of ownership | Baseline | Up to 10% lower |
| FPV drone frames per build | 104 | 204 |
Stratasys H550 FAQ
How big is the H550 build volume?
365 x 208 x 450 mm, or 34.2 liters. That is about 80% more than the H350’s 19.2 liters.
When can I get an H550?
Stratasys expects commercial availability in Q2 2027. Join the waitlist and we’ll follow up as dates firm up.
What materials does the H550 print?
SAF PA12 at launch, for durable end-use parts.
What consumables does the H550 use?
Powder and High Absorbing Fluid (HAF). There are no separate printhead, cleaning-roll, detailing-agent, or filter consumables.
What does the PowderEase T2 do?
It automates breakout, sieving, and dosing. One unit supports up to six H550 printers running the same material, and total operator time is under 30 minutes per build.
Should I choose the H350 or the H550?
The H350 fits small to mid-size parts. The H550 adds large parts and fits more parts per build, which suits teams with growing production volume.


